3S 10A 12V Lithium Battery Charger Protection Board BMS Module for 3pcs 18650 Li-ion Battery Cell Charging 11.1V 12.6V

1383-s86

New product

₨ 250

Add to wishlist

More info

Model: HX-3S-01
Overload voltage range: 4.25-4.35 v ± 0.05 v
Overpressure voltage range: 2.3-3.0 v ± 0.05 v
Size: 50 * 16 * 1.0mm
Maximum operating current: 5-8A Operating temperature: -40 --- + 50 & # 8451;
Maximum instantaneous current: 9-10A Storage conditions: -40- + 80 & # 8451;
Current at rest: less than 6uA useful life: more than 30,000 hours
Internal resistance: less than 60mΩ short circuit protection: protection, self-recovery delay.
the size of the protection board and description of the device;
The size protection board is 50 * 16 * 1.0mm; components for the Seiko S-8254AA protection chip and genuine FDS 4435A * 4;
note:
The protection board cannot be used for polymer battery iron, battery hand drill, electric fish battery machine, electric bicycle battery, 2 and then in series 24 V use, 775 (4A) above of the motor, 1 W fish eye LED light.
described in the power range for the following products:
vacuum cleaner battery massager, LED light backup power supply, 12V electronic products, solar battery street lamp, backup power supply monitor, and other products.
Explanation description:
3 string (for 3 18650 lithium polymer batteries or batteries combination in series)
10.8 V (nominal voltage of lithium polymers)
11.1 V (18650 or 3.7 V lithium battery voltage)
12.6 V (lithium battery is fully charged after voltage)
10A discharge (referring to the maximum discharge current limit)
lithium battery protection plate
Comes with: overload, over discharge, over current, short circuit protection
18650 lithium battery should!

1.1

2) Diagram:

With the same charge and discharge port, please connect P + and P-for the load and

discharge

2.2

2) Electrical parameters (Temerature: 25C) I

Article

condition

min ..

Typ.

Max.

unity

input voltage (Between B + and-)

VSS-0.3-VSS + 26

V

reach the working temperature

-40

/

85

C

Storage temperature range

-40

/

125

C

The excess load of protective voltage

4.325

4.350

4.375

V

the excess load of charge voltage

4.100

4.150

4.200

V

over-discharge voltage protection

2.320

2,400

2.480

V

Over-discharge the charging voltage

2,900

3,000

3.100

V

Overload detection delay times

0.5

1.0

1.5

s

Over-time detection delay times

fifty

100

150

MS

Over-current protection delay times

0.4

1

1.6

MS

short circuit detection delay times

/

/

/

ee uu

PCB resistance

30

/

80

rest current

1.8

/

14.2

uA

Overcurrent

8.0

/

12.0

a

work stream

6.0

/

12.6

V

A2

Reviews

No customer reviews for the moment.

Write a review

3S 10A 12V Lithium Battery Charger Protection Board BMS Module for 3pcs 18650 Li-ion Battery Cell Charging 11.1V 12.6V

3S 10A 12V Lithium Battery Charger Protection Board BMS Module for 3pcs 18650 Li-ion Battery Cell Charging 11.1V 12.6V