Proximity Sensor E2E-X10ME1 OMRON

689

New product

Proximity Sensor E2E-X10ME1 OMRON 

Application

  • rpm measurement,

  • positioning,

  • limiting,

  • Detecting Dynamic Motion

  • conveyor system


18mm tip size
Voltage range 6 to 36 DC
Type NPN
Working distance 5mm

More details

₨ 1'200

Add to wishlist

More info

Sensing head size M18
Type Unshielded
Sensing method Inductive type
Sensing distance 10 mm-10% to +10%
Setting distance 0 to 8 mm
Operation mode

NO

Type Unshielded
Sensing method Inductive type
Sensing distance 10 mm-10% to +10%
Setting distance 0 to 8 mm
Differential distance 10% Max. of sensing distance
Sensing object Ferrous metal (Sensitivity lowers with non-ferrous metals.)
Standard sensing object Iron 30 x 30 x 1 mm
Power supply voltage 12 to 24 VDC ripple(p-p) 10% Max.
Operating voltage range 10 to 30 VDC
Current consumption 13 mA max.
Control output (Output type) NPN voltage-current output
Control output (Switching capacity) 0 to 200 mA
Indicator Operation indicator (red)
Operation mode NO
Sensitivity setting -
Self-diagnostic output -
Protective circuit Surge suppressor
Output short-cut protection
Power supply reverse polarity protection
Standard or Different frequency Standard
Ambient temperature Operating: -40 to 85 ℃
Storage: -40 to 85 ℃
Ambient humidity Operating: 35 to 95%RH
Storage: 3595%RH
Temperature influence +/- 10% Max. of sensing distance in temperature range of -25 to +70 CEL
+/- 15% Max. of sensing distance in temperature range of -40 to +85 CEL
(As the basis for sensing distance of 23 CEL
Voltage influence +/- 1% Max. of sensing distance in rated voltage range +/- 15%.
(As the basis for sensing distance at standard power voltage)
Insulation resistance 50 MOhm Min. at 500 VDC between charged parts and the case
Dielectric strength 1000 VAC 50/60 Hz for 1 minute between charged parts and the case
Vibration resistance 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance 1000 m/s**2 for 10 times each in X, Y, and Z directions
Degree of protection IEC60529: IP67
Company standard: Oil-proof
Connection method Pre-wired models(Cable length: 2 m)
Weight (Packed state) approx. 150 g
Material (case) Brass nickel plating
Material (sensing surface) PBT
Material (clamping nuts) Brass nickel plating
Material (toothed washer) Iron zinc plating

Proximity Sensor

The basic purpose of a proximity sensor is to perceive occurrence of any object without being in contact with it. A proximity sensor makes a field around it by emitting electromagnetic radiations. The beam of electromagnetic radiations traces any object or hurdle in its way. The term ‘target’ is used for the object that a proximity sensor intuits in its path. The sensor looks for any alteration made in its field. Target usually replaces a certain beam of the field or hurdles its projection. Different fields or sensors are used to detect different targets.

Reviews

No customer reviews for the moment.

Write a review

Proximity Sensor E2E-X10ME1 OMRON

Proximity Sensor E2E-X10ME1 OMRON

Proximity Sensor E2E-X10ME1 OMRON 

Application

  • rpm measurement,

  • positioning,

  • limiting,

  • Detecting Dynamic Motion

  • conveyor system


18mm tip size
Voltage range 6 to 36 DC
Type NPN
Working distance 5mm