Arduino Mega Directly Connectable 3.2 Inch 320 X 480 TFT LCD Display Module

1443

New product

Arduino Mega Directly Connectable 3.2 Inch 320 X 480 TFT LCD Display Module

No need extra shield for this LCD.

More details

This product is no longer in stock

₨ 1'400

Add to wishlist

More info

Overview;

3.2 Inch TFT LCD with 262K color 480x 320 resolutions.The controller of this LCD module is HX8357B, it supports 16-wires DataBus interface.Moreover, this module includes the 5V-3.3V power conversion circuit and Level conversion circuit, This Module can Directly inserted into the Arduino Mega2560 Board ,it also includes the SD card socket and SPI FLASH circuit

Feature:



Support Arduino Mega2560 Directly inserted
With Full-angle IPS TFT panel
OnBorad level conversion chip for 5V/3.3V MCU
Compatible with 3.3/5V operation voltage level
Compatible with Arduino-Series development Board.
(Please notice:This Screen is not touch screen)
Provided 12-examples with Arduino ,3-examples with STM32
With SD Card Socket
With SPI FLASH circuit

Parameter:

 
Display Type:  3.2 inch a-si TFT LCD Module
Glass Type:  TFT IPS(Full-Angle)
Display Resolution:  480 X RGB X 320 Pixels
Back light:  6 chip HighLight white LEDs
Interface:  16Bit parallel interface
PCB Module size:  89.92mm X 54.25mm
LCD Area(WxHxT):  50.74mm X 78.35mm X 1.88mm
Active Area(WxH):  67.68mm X 45.12mm
/*
* IRFAN AHMAD
* 16 DEC 17
*
*
*/
#include <avr/pgmspace.h>
#include <UTFT.h>
extern uint8_t SmallFont[];
extern uint8_t BigFont[];
extern uint8_t SevenSegNumFont[];
UTFT myGLCD(CTE32HR,38,39,40,41);
void setup()
{
randomSeed(analogRead(0));
myGLCD.InitLCD();
}
///////////////////////////////////////////////////////////
void loop()
{
myGLCD.setColor(0, 255, 0);
myGLCD.setBackColor(0, 0, 0);

myGLCD.setFont(BigFont);
myGLCD.print(" WWW.HALLROAD.ORG", CENTER, 30);
myGLCD.setFont(SevenSegNumFont);
myGLCD.print("04237325297", CENTER, 60);
myGLCD.print("03124002221", CENTER, 120);
myGLCD.setColor(0, 0, 255);
myGLCD.setBackColor(0, 0, 0);
myGLCD.drawLine(239, 15, 239, 304);
myGLCD.drawLine(1, 159, 478, 159);
for (int i=9; i<470; i+=10)
myGLCD.drawLine(i, 157, i, 161);
for (int i=19; i<220; i+=10)
myGLCD.drawLine(237, i, 241, i);


myGLCD.setColor(0,255,255);
for (int i=1; i<478; i++)
{
myGLCD.drawPixel(i,159+(sin(((i*1.13)*3.14)/180)*95));
}

myGLCD.setColor(255,0,0);
for (int i=1; i<478; i++)
{
myGLCD.drawPixel(i,159+(cos(((i*1.13)*3.14)/180)*95));
}

myGLCD.setColor(255,255,0);
for (int i=1; i<478; i++)
{
myGLCD.drawPixel(i,159+(tan(((i*1.13)*3.14)/180)));
}
delay(2000);
}

Reviews

No customer reviews for the moment.

Write a review

Arduino Mega Directly Connectable 3.2 Inch 320 X 480 TFT LCD Display Module

Arduino Mega Directly Connectable 3.2 Inch 320 X 480 TFT LCD Display Module

Arduino Mega Directly Connectable 3.2 Inch 320 X 480 TFT LCD Display Module

No need extra shield for this LCD.

Download

LIBRARY

ZIP FILE FOR UTFT

Download (2.52M)