TB6600 DC12-45V 4.5A Two Phase Hybrid Stepper Motor Driver

648

New product

TB6600 CNC Router 

TB6600 DC12-45V 5A Two Phase Hybrid Stepper Motor Driver 

More details

This product is no longer in stock

₨ 2'400

Add to wishlist

More info

The TB6600HQ is a PWM chopper-type single-chip bipolar sinusoidal micro-step stepping motor driver.
Forward and reverse rotation control is available with 2-phase, 1-2-phase, W1-2-phase, 2W1-2-phase, and 4W1-2-phase excitation modes.
2-phase bipolar-type stepping motor can be driven by only clock signal with low vibration and high efficiency.

TB6600 Features

  1. Single-chip bipolar sinusoidal micro-step stepping motor driver

  2. BiCD 0.13 (50 V) process

  3. Ron (upper + lower) = 0.4 Ω (typ.)

  4. Forward and reverse rotation control available

  5. Selectable phase drive (1/1, 1/2, 1/4, 1/8, and 1/16 step)

  6. Output withstand voltage: VCC = 50 V

  7. Output current: IOUT = 5.0 A (absolute maximum ratings, peak, within 100ms) IOUT = 4.5 A (operating range, maximal value)

  8. Packages: HZIP25-1.00F

  9. Built-in input pull-down resistance: 100 kΩ (typ.)

  10. Output monitor pins (ALERT): Maximum of IALERT = 1 mA

  11. Output monitor pins (MO): Maximum of IMO = 1 mA

  12. Equipped with reset and enable pins

  13. Stand by function

  14. Single power supply

  15. Built-in thermal shutdown (TSD) circuit

  16. Built-in under voltage lock out (UVLO) circuit

  17. Built-in over-current detection (ISD) circuit

Overview

The module working voltage is 12~48V. it can used to drive a stepper motor. The stepper motor is suitable for 4.5A 2-phase model.

1. Excitation Settings

The excitation mode can be selected from the following eight modes using the M1, M2 and M3 inputs. New excitation mode starts from the initial mode when M1, M2, or M3 inputs are shifted during motor operation. In this case, output current waveform may not continue.
 

INPUT

Mode(Excitation)

M1

M2

M3

OFF

OFF

OFF

Standby mode (Operation of the internal circuit is

almost turned off.)

OFF

OFF

ON

1/1 (2-phase excitation, full-step)

OFF

ON

OFF

1/2A type (1-2 phase excitation A type)

( 0% - 71% - 100% )

OFF

ON

ON

1/2B type (1-2 phase excitation B type)

( 0% - 100% )

ON

OFF

OFF

1/4 (W1-2 phase excitation)

ON

OFF

ON

1/8 (2W1-2 phase excitation)

ON

ON

OFF

1/16 (4W1-2 phase excitation)

ON

ON

ON

Standby mode (Operation of the internal circuit is

almost turned off.)

Note: To change the exciting mode by changing M1, M2, and M3, make sure not to set M1 = M2 = M3 = L or M1 = M2 =M3 = H.

Standby mode

The operation mode moves to the standby mode under the condition M1 = M2 = M3 = L or M1 = M2 = M3= H.
The power consumption is minimized by turning off all the operations except protecting operation.
In standby mode, output terminal MO is HZ.
To release the standby mode, release the condition of M1 = M2 = M3 = L or M1 = M2 = M3 = H.
Input signal is not accepted for about 200 μs after releasing the standby mode.

2. LATCH Settings

INPUT

Mode(Excitation)

Latch/Auto

ON

Automatic return

OFF

Latch

Note: Latch/Auto mean Select a return type for thermal shutdown (TSD) circuit and over-current detection (ISD) circuit., when TSD or ISD is happen, the WARN led will work.

Warning

When you get the TB6600 module. First, do not urgently to use it. There are so many stepper motor of different kind in the world. Different stepper motor have different internal resistance, so the TB6600 module adjustable output current is inaccurate. You must series connection an ammeter in the TB6600 module power. When the module is working, look carefully on ammeter, if output current is too high, close the power immediately, adjusting current to suitable.

Image result for tb6600 wiring

Reviews

No customer reviews for the moment.

Write a review

TB6600 DC12-45V 4.5A Two Phase Hybrid Stepper Motor Driver

TB6600 DC12-45V 4.5A Two Phase Hybrid Stepper Motor Driver

TB6600 CNC Router 

TB6600 DC12-45V 5A Two Phase Hybrid Stepper Motor Driver